EZ-Air Operating Instructions

  Remove tire valve cap. With clip-on air chuck lever depressed, firmly press chuck onto tire valve stem and release lever. If the air chuck leaks, remove, rotate slightly and reinstall. Gauge will now read tire pressure.
If air is needed, use a compressor hose designed to be used on a automobile tire valve (shrader valve). Gas station compressors are equipped with this type of hose.
Apply the hose to the EZ-Air.
NOTE: The gauge will not show correct tire pressure while inflating tire.
To read tire pressure, remove the hose from the air inlet. If more air is needed, apply the air hose again.
Add a little too much air? Use the pressure release button on the top of the gauge to adjust pressure.
NOTE: The gauge will not show correct tire pressure while deflating tire.
Remove the EZ-Air.